Announcement

Collapse
No announcement yet.

newbie and heres my project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • perandall
    started a topic newbie and heres my project

    newbie and heres my project

    here goes my project. believe it is a 1970s wriedt stinger jet. got some pics. take a look as i post lots of work to do.some of the parts i made for her at my shop gas caps dash and wheel adapters all cnc milled and turned
    Attached Files

  • perandall
    replied
    Re: newbie and heres my project

    have a tandem axle trailer coming for the wriedt ..my buddy thats been helping me wont even look at the kona till we r done with the wriedt..the wriedt is for sure heavier cant lift the back of the wriedt by myself and the kona i can no problem.

    Leave a comment:


  • Chili
    replied
    Re: newbie and heres my project

    Originally posted by JetBoatPerformance View Post
    Very Good Eye Bud , shhhhh Top secret Sh*t I'll fill in the blanks for ya PDQ
    Interesting...

    Leave a comment:


  • Gone Green
    replied
    Re: newbie and heres my project

    Originally posted by perandall View Post
    yeah i got the jg on my wriedt split bowl. not sure what i gonna do with the kona yet. i actually machine alot of parts for cp performance and hardin marine where i work at. been gettin lot of help from him over at cp here in rohnert park.machine the billet breathers thepulleys and a bunch of other stuff...oh yeah the quick draw shifter setup we machine and u get the point. gonna have to see how much can do to the kona the way it is.
    If it were me I'd go with the wriedt..for one the kona has a bow-tank and it doesn't have the lay-up the wriedt has...swap-out the trailors and do the wriedt thing..

    Leave a comment:


  • JetBoatPerformance
    replied
    Re: newbie and heres my project

    Originally posted by bwurst1 View Post
    Hey Tom, Whats the cable for on the passenger side of the pump? That E pump doesn't appear to have a diverter.
    Very Good Eye Bud , shhhhh Top secret Sh*t I'll fill in the blanks for ya PDQ

    BTW Sold both my Blown Tunnel and Blown Cruiser , this is part of my this years project

    Leave a comment:


  • bwurst1
    replied
    Re: newbie and heres my project

    Hey Tom, Whats the cable for on the passenger side of the pump? That E pump doesn't appear to have a diverter.
    Last edited by JetBoatPerformance; 06-10-2011, 07:22 PM.

    Leave a comment:


  • JetBoatPerformance
    replied
    Re: newbie and heres my project

    E pumps offer very good performance often rivaling thier "12JC&G siblings and there is a great deal of performance mods available for them particulaly if you wish to go with a split bowl. (eg Wedges droops etc ) We now make a very effective "E" loader and have available E add-a -shoe/rideplate kits as well as a number of different pieces. Maybe give some thought to "Top steering" your "E" as it eliminates the low mount leaky cables and top mounting makes rigging "bolt ons" (droops etc) a breeze Cll or PM if Josh or I can help were in process of doing a couple of these right now Thanks Tom


    Last edited by JetBoatPerformance; 06-09-2011, 08:11 PM. Reason: added pic

    Leave a comment:


  • perandall
    replied
    Re: newbie and heres my project

    yeah i got the jg on my wriedt split bowl. not sure what i gonna do with the kona yet. i actually machine alot of parts for cp performance and hardin marine where i work at. been gettin lot of help from him over at cp here in rohnert park.machine the billet breathers thepulleys and a bunch of other stuff...oh yeah the quick draw shifter setup we machine and u get the point. gonna have to see how much can do to the kona the way it is.

    Leave a comment:


  • Cas
    replied
    Re: newbie and heres my project

    Originally posted by perandall View Post
    not abandoning the wriedt got the third degree from my buddy who has been helping...gonna finish the wriedt then move on to the kona make it the hotrod. has a setback pump and very shallow and light hull compared to the wriedt. will post pics soon.
    The Kona has an E Pump which is an insert style pump. Although you can make them run pretty good, they aren't the ideal Berkeley pump for maximum performance. There are a few mods you can do to make it better but they still aren't as versatile as an A, B, C or G pumps.
    For instance, you will need a split bowl to be able to add wedges, droops, diveter, etc. Since all the cables on the E pump are connected at the bottom, not all parts are interchangeable with the other pump so you need to make sure if you get something used, it will fit the E.
    If you want the real skinny, Performance Jet is in Sebastopol and Jim will be more than happy to inform you on what you should or shouldn't do with that pump and he's close.

    I also remember seeing some pictures where Tom/Josh at Jet Boat Performance modified an E pump so the cables attach at the top.

    Leave a comment:


  • perandall
    replied
    Re: newbie and heres my project

    pics of the kona
    Attached Files

    Leave a comment:


  • perandall
    replied
    Re: newbie and heres my project

    not abandoning the wriedt got the third degree from my buddy who has been helping...gonna finish the wriedt then move on to the kona make it the hotrod. has a setback pump and very shallow and light hull compared to the wriedt. will post pics soon.

    ---------- Post added at 09:02 PM ---------- Previous post was at 08:56 PM ----------

    not abandoning the wriedt got the third degree from my buddy who has been helping...gonna finish the wriedt then move on to the kona make it the hotrod. has a setback pump and very shallow and light hull compared to the wriedt. will post pics soon.

    ---------- Post added at 09:03 PM ---------- Previous post was at 09:02 PM ----------

    not abandoning the wriedt got the third degree from my buddy who has been helping...gonna finish the wriedt then move on to the kona make it the hotrod. has a setback pump and very shallow and light hull compared to the wriedt. will post pics soon.

    ---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------

    wtf!!! that was weird

    Leave a comment:


  • bwurst1
    replied
    Re: newbie and heres my project

    So,are you abandoning the wriedt? Lets see the Kona!! Pics please!!

    Leave a comment:


  • perandall
    replied
    Re: newbie and heres my project

    picked up another project....75 kona with a setback berk pump..:

    Leave a comment:


  • bwurst1
    replied
    Re: newbie and heres my project

    Coming along nicely. Do yourself a favor and paint your loader grate white. Its easier to see cracks and check it often. Sometimes black will mask cracks and makes it way harder to tell if a crack if forming. Just my Safety first.

    Leave a comment:


  • perandall
    replied
    Re: newbie and heres my project

    more progress on the boat. got the jet blasted repainted and rebuilt along with the intake and an se loader for it.started rebuilding all the interior as well.
    Attached Files

    Leave a comment:

Working...
X